Q910
Previous slide
Next slide

Q910 SINGLE EAR HEADSET

Light weight single ear intercom headset with dynamic microphone, XLR-4f connector and 1,5 meter cable length.

WHERE TO BUY

Benefits

Plug & play

Get it out and get things done. There is no time on site. That’s why the plug & play concept of the Q110 beltpack will be your favourite. Just get it out of its box, plug it into a network and start communicating. Quick.

EASE OF USE

You don’t want to study a manual explaining features you probably would never use in the first place. You want your gear to get going. So we strapped the beltpack down to what is necessary. No gimmicks, no fancy decorations, no bullshit. Just the tool. Quintessential

DAISY-CHAINABLE

Colleagues are working side by side? Daisy-chain their beltpacks and save long cable runs. Easy.

REPLACEABLE BELTCLIP

You want to remove or replace the beltclip? No problem, in just one second – without the need of a screwdriver or any other tool. Quick.

Key Features

  • Plug and Play
  • Powered by any PoE source (Switch/Injector)
  • Daisy-chain up to 8 beltpacks on one line
  • Audio replay of missed calls (up to 30s)
  • No master station needed
  • Supports industry standard headsets (4-Pin)
  • Works with any IP switch
  • Talk/Listen to any 2 out of 32 partylines
  • 2 configurable “Talk-to-many“ channels
  • Flexible configuration
  • Choose 1 out of 4 program inputs*
  • Operate 4 out of 32 GPIO outputs*
  • Talk to max. 4 PA channels*
  • On- and Offline configuration software (Win/Mac)
  • (*) Only with speaker station

Specifications

Beltpack Specifications
Power Source

PoE (max. 15W)
PoE+ (max. 30W)
4-pair PoE (max. 90W)
Power consumption

2.5W typ. 3.5W max.
Sampling Rate 1

16 kHz 
Headset Connector

XLR 4pin male
LAN/PoE Connector

RJ-45 etherCON
Environment

IP53
Operating Temp.

-10° to +50°C
Relative humidity

0 to 90%, non condensing
Intercom connection

RJ-45 etherCON
Beltclip

Easy removable, spring loaded clip
H x W x D

111mm x 110mm x 40mm
Weight

255g
Headset
Output impedance

27 Ohm

Output level

+ 18.5 dBu (max.)

Frequency response

20Hz to 10kHz (+0/-0.25dB)

Distortion @ 1kHz

<-73 dB (0.02%)

Dynamic range (20kHz)

95 dB (A-weighted)
Microphone Input
Type

Dynamic, Electret
Full-scale input range

95dB (A-weighted)
Distortion
< -75 dB (0.02%) @ + 4dBu FS (min. gain)
< -68 dB (0.04%) @ -30dBu FS
< -49 dB (0.35%) @ -53dBu FS (max. gain)
 
Dynamic range
92 dB (min. gain)
59 dB (max. gain)
 
Product Information
Product name

Q110
Package contents
Q110 Beltpack, Beltclip,
Quick Start Guide
 

(*) all specifications are subject to change without notice

DATASHEET

RELATED PRODUCTS

Q110 BELTPACK

The easy-to-use and ergonomic Q110 Beltpack offers two channels of partyline intercom and is packed with many useful features

Learn more

Q-TOOL CONFIG SOFTWARE

Q-Tool Configuration Software allows adjusting the system to your needs. Quick and easy. No fancy features but solid and to the point functionality no matter what Operating System you are working on.

Learn more

Q920 DUAL EAR HEADSET

Light weight dual ear intercom headset with dynamic microphone, XLR-4f connector and 1,5 meter cable length.

Learn more