Q210 PW SPEAKER STATION
The Q210 PW – Speaker Station gives you full control in a cost-effective and easy-to-use package. With 4 Channel communication and mobile app connectivity.
Equipped with programmable buttons for muting all mics, making paging announcements or triggering logic outputs. With a built-in network switch with 4 ports. With a built-in 4-port network switch, each speaker station can support up to 4 punQtum wireless app connections, meaning a total of 8 possible connections and limitless daisy-chaining capabilities.
The Q210 PW Speaker Station is your complete, self-contained communication hub for wired and wireless communication
Key Features
- 4-channel partyline speaker station
- Compatibility with punQtum Wireless - up to 4 mobile devices
- Built in loudspeaker
- Microphone and headset connector
- Rugged, Ethercon™ connectors
- Easy-to-read colour display
- 4 configurable buttons for PA announcements, talk to all, and GPO
- Audio replay of missed comms
- GPI inputs and outputs
- Analogue inputs/outputs (2x 4-wire ports + 2x inputs + 2x outputs)
- Built-in PoE switch to power up to 8 beltpacks or a wireless access point
- 2 Public address output
- 2 Program signal inputs
- On- and Offline configuration software (Win/ Mac)
Specifications
| General Specifications | |
|---|---|
|
Power Source |
50 … 54 VDC |
|
PoE Power |
30W per PoE port |
|
Sampling Rate |
16 kHz |
|
Headset Connector |
XLR 4pin male |
|
Connector Ethernet/LAN |
4x RJ-45 EtherCon |
|
Microphone Connector |
1/4“ jack with 7/16“ -20 UNF thread |
|
Built-in Speaker |
5 Watts |
|
Operating Temp. |
-10° to +50°C |
|
Operation Environment Humidity |
0 to 90% non-condensing |
|
H x W x D |
19“ 1HU: 100 x 433 x 44 mm |
|
Weight |
1.7 kg |
| Headphone Output | |
|---|---|
|
Output impedance |
27 Ohm |
|
Output level |
+ 18.5 dBu (max.) |
|
Frequency response |
20Hz to 7kHz (+0/-1dB) |
|
Distortion @ 1kHz |
<-73 dB (0.02%) |
|
Dynamic range (20kHz) |
95 dB (A-weighted) |
| Microphone Input | |
|---|---|
|
Bias Voltage |
5.4V (typ.) |
|
Full-scale input range |
-53 … +4 dBu |
|
Distortion @ 1kHz |
< -75 dB (0.02%) @ + 4dBu FS (min. gain) |
|
Dynamic range |
92 dB (min. gain) 59 dB (max. gain) |
| Analog Interface Outputs | |
|---|---|
|
Input Impedance |
< 2 Ohm |
|
Input Level |
+ 18 dBu (max.) |
|
Frequency Response |
20Hz to 7kHz (+0/-0.25dB) |
|
Distortion @ 1kHz |
<-80 dB (0.01%) |
|
Dynamic Range (20kHz) |
98 dB (A-weighted) |
| Analog Interface Inputs | |
|---|---|
|
Input Impedance |
> 20 kOhm |
|
Input Level |
+ 18 dBu (max.) |
|
Frequency Response |
20Hz to 7kHz (+0/-0.25dB) |
|
Distortion @ 1kHz |
<-80 dB (0.01%) |
|
Dynamic Range (20kHz) |
90 dB (A-weighted) |
| GPI Inputs | |
|---|---|
|
Input Connector |
D-Sub 9 female |
|
Number of GPI Inputs |
4 |
|
Input Type |
Optocoupler input with current limiter |
|
Input Voltage |
5 … 50 VDC |
|
Input Current |
5 mA (typ.) |
| GPI Outputs | |
|---|---|
|
Output Connector |
D-Sub 9 male |
|
Number of GPI Outputs |
4 |
|
Output Type |
PhotoMOS Relay |
|
On Resistance |
< 3 Ohm |
|
On Current |
200 mA (max.) – resettable PTC fuse |
|
Maximum Voltage |
50 VDC / 35 VAC |
(*) all specifications are subject to change without notice
RELATED PRODUCTS
Q920 DUAL EAR HEADSET
Light weight dual ear intercom headset with dynamic microphone, XLR-4f connector and 1,5 meter cable length.
WIRELESS
punQtum Wireless is the easy way to extend your intercom system using your mobile device. Download the free app and connect to a punQtum networking using a Wi-Fi access point and the Q210PW speaker station.
Q910 SINGLE EAR HEADSET
Light weight single ear intercom headset with dynamic microphone, XLR-4f connector and 1,5 meter cable length.